Looking for info on underdrive pulleys...

GT100e · 06-16-2009, 07:41 AM

Hi, I've put this thread in the BMC forum, had views but no replies

http://www.bmcforums.com/showthread.php?t=57885

I would just like to be sure that this ugly "rusty" part(pic) will not have to be put back on the car when the kit (pictured too) will be installed. Everybody sells the kit and tells all about the HP gains and blablabla... But nobody puts pics of the kit installed so I can be sure that thing is taken off for good...

Thanks!

Marco

Lisa · 06-16-2009, 12:47 PM

I just saw this, and Mikey will get some info for you. Sorry for not seeing it on the BMC forums ... I don't often get around too much there other than in the Staff and BMCP sections, and stuff. We'll get this for you ...

GT100e · 06-16-2009, 12:54 PM

Thanks Lisa, the main reason for doing this in the first place was to get rid of that rusty
"Crankshaft thing" or whatever it is called
I just wouldn't want to do this, or in my case, have it done... And still be keeping that part.

Marco

GT100e · 06-18-2009, 06:47 AM

I've put a pic I found of the pulleys installed on the BMC thread at the top, the rusty crankshaft thing is gone but nowhere does it say the install is finished and that the Stang is running good... Hate not being a mechanic

Lisa · 06-19-2009, 08:50 AM

Mikey's been working on this for you.

GT100e · 06-19-2009, 11:33 AM

Quote:

Originally Posted by Lisa

Mikey's been working on this for you.

Thank you!

GT100e · 06-30-2009, 07:18 AM

I'm finally going to take out the damper, paint it with "glass shield" gloss black and attach the underdrive pulley to it, like the instructions say...
Sucks, I really wanted it chrome or billet aluminum but don't want to spend the extra $$$ that it would require...Especially for a part that only bugs me

Mikey · 06-30-2009, 11:34 AM

I have been looking at all the pulley kits, and like Redbeard on BMC says, it really depends on the kit on what is replaced or installed.

Like this kit
http://www.bmcspeedshop.com/product_p/bbk-1559.htm
No hardware is included in it so the bolt would be reused, but includes these pullies: Crankshaft, Water Pump, and Alternator Pulley.

GT100e · 06-30-2009, 12:11 PM

Quote:

Originally Posted by Mikey

I have been looking at all the pulley kits, and like Redbeard on BMC says, it really depends on the kit on what is replaced or installed.

Like this kit
http://www.bmcspeedshop.com/product_p/bbk-1559.htm
No hardware is included in it so the bolt would be reused, but includes these pullies: Crankshaft, Water Pump, and Alternator Pulley.

That's the kit "Mikey", you have to attach the new crankshaft pulley to the old one, that's why they call it "piggyback", I didn't know that when I bought the kit but once I sand and redo the old damper in black, everything is going to be fine, if not, next year,I'll just have to buy the S.F.I. approved kit which comes with a crankshaft pulley/damper all in one but is a bit more expensive...I've got the kit now so I'll justput it on and enjoy it.

Thanks for the feedback, wish the BMC shop was up here in "La Belle Province"

Marco

GT100e · 07-09-2009, 01:00 PM

Got everything installed, felt great...Except: My brand new 200A Chrome alternator wasn't charging so after a little ride with a little fun, battery died and I stalled on idle, had to put back my stock alternator until the new (I hope working) one arrives.
My damper looks great all sanded and paint with glass-shield.

Lisa · 07-09-2009, 01:59 PM

Let's see some pics!!

GT100e · 07-09-2009, 02:14 PM

Lisa I'm trying this link to see if it will work for the couple of pics I put on the BMC forum...

http://www.bmcforums.com/showthread.php?t=57885

http://www.bmcforums.com/attachment....7159381http://

When I get everything up and running I'll put pics of the finished product.
Looked and felt great until the Alternator...

GT100e · 07-11-2009, 08:55 AM

Before-After Damper-Crankshaft pulley?

Can't wait to have everything done, the car feels great even with my "stock" alternator but the chrome one will look better...

GT100e · 08-03-2009, 04:09 PM

The finished product :

http://www.bmcforums.com/showthread.php?t=59027

Love the end result

Marco

Mikey · 08-03-2009, 05:55 PM

Looks great Marco!

GT100e · 08-22-2009, 07:55 AM

Quote:

Originally Posted by Mikey

Looks great Marco!

Thanks "Mikey" and I enjoy it alot, now starting to look for future mods for 2010 since the nice season, here in Qu?bec, is slowly but surely ending...

Hood struts, Strut tower brace - Sway bars, fuel rails... ???
I'll probably need some new tires, so that digs a Monstrous hole in the wallet.

06-16-2009, 07:41 AM	#1
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	Looking for info on underdrive pulleys... Hi, I've put this thread in the BMC forum, had views but no replies http://www.bmcforums.com/showthread.php?t=57885 I would just like to be sure that this ugly "rusty" part(pic) will not have to be put back on the car when the kit (pictured too) will be installed. Everybody sells the kit and tells all about the HP gains and blablabla... But nobody puts pics of the kit installed so I can be sure that thing is taken off for good... Thanks! Marco __________________ *You Gotta love a clean BLACK 'Stang*

06-16-2009, 12:47 PM	#2
Lisa I <3 Danni Join Date: Aug 2006 Location: WPB, FL Posts: 6,004	I just saw this, and Mikey will get some info for you. Sorry for not seeing it on the BMC forums ... I don't often get around too much there other than in the Staff and BMCP sections, and stuff. We'll get this for you ... __________________ Lisa \| President \| Speedlogix, Inc. 2009 Black Challenger R/T // 2006 Silver 300 SRT8 * BMC Performance is now Speedlogix *

06-16-2009, 12:54 PM	#3
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	Thanks Lisa, the main reason for doing this in the first place was to get rid of that rusty "Crankshaft thing" or whatever it is called I just wouldn't want to do this, or in my case, have it done... And still be keeping that part. Marco __________________ *You Gotta love a clean BLACK 'Stang*

06-18-2009, 06:47 AM	#4
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	I've put a pic I found of the pulleys installed on the BMC thread at the top, the rusty crankshaft thing is gone but nowhere does it say the install is finished and that the Stang is running good... Hate not being a mechanic __________________ *You Gotta love a clean BLACK 'Stang*

06-19-2009, 08:50 AM	#5
Lisa I <3 Danni Join Date: Aug 2006 Location: WPB, FL Posts: 6,004	Mikey's been working on this for you. __________________ Lisa \| President \| Speedlogix, Inc. 2009 Black Challenger R/T // 2006 Silver 300 SRT8 * BMC Performance is now Speedlogix *

06-30-2009, 07:18 AM	#7
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	I'm finally going to take out the damper, paint it with "glass shield" gloss black and attach the underdrive pulley to it, like the instructions say... Sucks, I really wanted it chrome or billet aluminum but don't want to spend the extra $$$ that it would require...Especially for a part that only bugs me __________________ *You Gotta love a clean BLACK 'Stang*

06-30-2009, 11:34 AM	#8
Mikey Good ole Mikey! Join Date: Aug 2006 Location: Anywhere BMC Posts: 3,627	I have been looking at all the pulley kits, and like Redbeard on BMC says, it really depends on the kit on what is replaced or installed. Like this kit http://www.bmcspeedshop.com/product_p/bbk-1559.htm No hardware is included in it so the bolt would be reused, but includes these pullies: Crankshaft, Water Pump, and Alternator Pulley. __________________ Chris "Mikey" \| Sales and Support \| Speedlogix, Inc. * BMC Performance is now Speedlogix *

07-09-2009, 01:00 PM	#10
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	Got everything installed, felt great...Except: My brand new 200A Chrome alternator wasn't charging so after a little ride with a little fun, battery died and I stalled on idle, had to put back my stock alternator until the new (I hope working) one arrives. My damper looks great all sanded and paint with glass-shield. __________________ *You Gotta love a clean BLACK 'Stang*

07-09-2009, 01:59 PM	#11
Lisa I <3 Danni Join Date: Aug 2006 Location: WPB, FL Posts: 6,004	Let's see some pics!! __________________ Lisa \| President \| Speedlogix, Inc. 2009 Black Challenger R/T // 2006 Silver 300 SRT8 * BMC Performance is now Speedlogix *

07-09-2009, 02:14 PM	#12
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	Lisa I'm trying this link to see if it will work for the couple of pics I put on the BMC forum... http://www.bmcforums.com/showthread.php?t=57885 http://www.bmcforums.com/attachment....7159381http:// When I get everything up and running I'll put pics of the finished product. Looked and felt great until the Alternator... __________________ *You Gotta love a clean BLACK 'Stang* Last edited by GT100e; 07-10-2009 at 10:33 AM.

08-03-2009, 04:09 PM	#14
GT100e Love to wash my Stang! Join Date: Aug 2006 Posts: 135	The finished product : http://www.bmcforums.com/showthread.php?t=59027 Love the end result Marco __________________ *You Gotta love a clean BLACK 'Stang*

08-03-2009, 05:55 PM	#15
Mikey Good ole Mikey! Join Date: Aug 2006 Location: Anywhere BMC Posts: 3,627	Looks great Marco! __________________ Chris "Mikey" \| Sales and Support \| Speedlogix, Inc. * BMC Performance is now Speedlogix *

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TrickFlow 20% Underdrive Balancer 05-08 Hemi - $229.88	Lisa	Dodge & Chrysler	0	04-17-2009 10:17 PM
Underdrive Pulleys - 3.8L v6	squid	Product Requests	15	09-15-2008 06:19 PM
Need any info from the BMC forums?	Lisa	Black Mustang Club Lounge	6	02-29-2008 11:58 PM
Shipping Info?	coreyjo	Order Help Desk	6	11-16-2007 02:48 PM
Tracking Info?	Cusican	Order Help Desk	10	06-11-2007 01:24 PM